Connect Kisi to an Alarm Panel

To connect Kisi to an alarm panel, you will need to run a low voltage cables from Common (COM) and Normally Open (NO) on the Kisi relay to Input 1 and Ground (GND), respectively.

Next, you will need to wire the lock to the Kisi relay.  Common (COM) and Normally Open (NO) for Fail Secure, Common (COM) and Normally Closed (NC) for Fail Safe.

Once you've connected the Kisi to the alarm panel and the lock, you will need to reach out to support@getkisi.com or (646) 663-4880 to have Kisi hard configure the relays to work in concert with each other to disarm the alarm and trigger the lock at the same time.