The Kisi hardware uses DHCP for addressing and will take the first address that is assigned to it from the local DHCP server in your network. If you need to assign a static IP to the Kisi Reader and/or Controller, you can make an IP address reservation on your DHCP server or router using the Kisi device's MAC addresses, found on a white sticker on your device. For the Kisi Controller, this white sticker is found on the inside of the controller box. For the Kisi Reader, this white sticker is found on the back of the reader, or wrapped around the cable that is attached to the reader.
Can I assign a static IP address to the Controller and Reader?