Assign door to reader

Now that the reader has been assigned to your place, in the next step you will want to configure which door it should be responsible for.

Kisi Reader

1. Sign in to Kisi
2. Open the Place menu and click on the Hardware tab
3. Click on Readers
4. Select the reader you want to assign a door to
5. Under Search doors or elevators, choose the corresponding door
6. Click Save

Legacy reader

1. Sign in to Kisi
2. Open the Place menu and click on the Hardware tab
3. Click on Controllers and select your Kisi Controller Pro 2
4. Scroll down to Wiegand connections
5. Select the Wiegand device interface to which you wired the legacy reader
6. Open the Type dropdown and select Legacy reader
7. Open the Search door dropdown and select the door this reader is assigned to

Legacy keypad reader

For a visual guide, simply scroll down to watch the accompanying video.

1. Sign in to Kisi
2. Open the Place menu and click on the Hardware tab
3. Click on Controllers and select your Kisi Controller Pro 2
4. Scroll down to Wiegand connections
5. Select the Wiegand device interface to which you wired the keypad reader
6. Open the Type dropdown and select Legacy keypad reader
7. Open the Keypad type dropdown and select your keypad type
8. Open the Search door dropdown and select the door this keypad reader is assigned to
9. Enable the Master code toggle and specify the PIN code that is currently set for this keypad
10. Enable the Two-factor authentication toggle if users should provide a physical credential and a PIN to gain access
11. Click Save

If you enabled two-factor authentication for your keypad reader, make sure to enable this also for those third-party credentials that should have access to this door.

On to the next step

Now it's time to configure reader premissions.