Skip to main content

Mobile credentials

As an organization administrator, you can enable users to use mobile credentials by setting the correct reader restrictions.

Enable Tap to Unlock with two-factor authentication​

Tap to Unlock allows you to unlock doors by tapping your mobile device against the Kisi Reader, without having to actively use the app. The communication is based on BLE and NFC technologies, transmitting the information to the controller and to the cloud. Communication with the controller can also be through a local network. If the local network is offline, the phone will request offline credentials from the cloud. In this case, the reader will talk to the controller without any intermediaries.

With two-factor authentication (2FA) enabled, you need to unlock your mobile device before tapping it against the Kisi Reader. This adds an extra layer of security. The feature is optional and fully customizable from the Kisi dashboard.

info
  • Tap to Unlock is enabled by default, no action is required to activate it.
  • To ensure the proper functioning of Tap to Unlock, please position your mobile device below the LED circle on the reader.
  1. Sign in to Kisi
  2. Navigate to your place dashboard
  3. Click on Hardware
  4. Select the Kisi Reader Pro 2 for which you want to activate Tap to Unlock with two-factor authentication
  5. Scroll down to Permissions
  6. Enable Two-Factor Authentication
  7. Click Save
info
  • To ensure the proper functioning of Tap to Unlock, please position your mobile device below the LED circle on the reader.
  • Please be aware that even with two-factor authentication enabled, there may be a brief 5-10 second window during which unlocking a reader with a locked phone is still possible after the phone is re-locked due to delays in receiving the state change from the operating system.

Enable Tap in-app​

Tap in-app allows you to unlock doors from within the Kisi app. The tap sends the unlock request directly to the cloud, then to the controller, which fires the relay opening the door. Note that in this case the reader is not necessary.

  1. Sign in to Kisi
  2. Navigate to your organization dashboard
  3. Click on Groups
  4. Select the group for which you want to activate Tap in-app
  5. Open the Permissions tab
  6. Enable Allow App Access
  7. Click Save

Enable MotionSense​

MotionSense allows you to unlock a door with just a wave of the hand.

note

To ensure MotionSense functions correctly, the user's mobile device must be in close proximity to the reader, and the user must wave their hand within a few inches of the reader's front for proper detection. The reader sensitivity setting allows adjustments for environments where signals might cause the reader to perceive the phone as closer or farther away than expected. Adjusting this setting can optimize performance based on specific environmental conditions. However, this setting does not affect the required distance of the hand when waving in front of the reader.

Based on your operating system, utilize the tabs below for guidance and instructions.

  • MotionSense enabled on the reader
  • The Kisi Android app installed
  • Bluetooth or NFC enabled
  • Phone nearby
  • Unrestricted app battery usage (Settings > Apps > Kisi > App battery usage > Unrestricted. Note: The steps might vary by mobile brand.)
  • Nearby devices permission enabled (Settings > Apps > Kisi > Nearby devices > Allow)
  • MotionSense enabled on the mobile (see below)
  1. Sign in to your Kisi organization, as described above
  2. Tap the user icon to open the User settings
  3. Tap on Hand wave unlock
  4. Enable Use hand wave unlock
info

The MotionSense functionality cannot be combined with the two-factor authentication restriction.

  1. Sign in to Kisi
  2. Navigate to your place dashboard
  3. Click on Hardware
  4. Select the Kisi Reader Pro 2 for which you want to activate MotionSense
  5. Enable MotionSense
  6. Click Save

MotionSense troubleshooting​

There can be several reasons as to why MotionSense might not be working. Please check that:

  • MotionSense is enabled for that specific Kisi Reader
  • You are on the latest version of the Kisi app
  • You are signed into the Kisi app
  • You have access to that specific door
  • You have your phone nearby. MotionSense works best when the user's phone is in close proximity to the reader. If the phone is in the front pocket while facing the reader, MotionSense will function properly. However, it may not work if the phone is in the back pocket or inside a bag located behind the user, as the signal cannot pass through the human body.
  • Depending on your device, NFC or Bluetooth is enabled on your phone
  • Location services are set to Always for the Kisi app
Last updated on by Carl